This guide details the necessary changes for Peplink firewalls

Weave phones work well with Peplink firewalls. There are several important settings to verify that the Peplink is configured correctly.

  1. Click the Network tab on the top navigation bar

  2. Click on Service Passthrough (under the Misc. Settings section in the lefthand menu)

  3. Set SIP to Compatibility Mode

 

 

 

 

 

 

peplink qos.png

   4.  Click the Network Tab on the top navigation bar

   5.  Click on Application (under the QOS section in the lefthand menu)

   6.  Uncheck the Enable checkbox under DSL/Cable Optimization

 

 

 

 

 

 

 

 

 

 

Final Note: Disable Secondary WAN connection if there is one OR create rule to ensure that all phone traffic goes through same WAN interface (may not be necessary - unconfirmed until further testing)