Required Configuration for D-Link DIR Series

Weave phones work well with D-Link DIR series routers as long as they following configuration options are set. Below is a detailed guide to configuring the D-Link series router.

  1. Upgrade to the latest version of D-Link firmware for your router
  2. Click on the Advanced tab on the top navigation bar
  3. Click on Firewall Settings on the left-hand menu
  4. In the NAT Endpoint Filtering section, change the following:
    • Change UDP Endpoint Filtering to Endpoint Independent
    • Change TCP Endpoint Filtering to Endpoint Independent
  5. In the Application Level Gateway (ALG) Configuration section, change the following:
    • Uncheck the checkbox labeled SIP
    • Uncheck the checkbox labeled RTSP
  6. Save the configuration and reboot


Was this article helpful?