Configuration for ZyWall Routers

Weave phones work well with ZyWALL routers. There is typically just one important setting to verify in the ZyWALL configuration. In order to ensure that no additional firewalls will be interfering with phone traffic, it is necessary to verify that the ZyWALL router is receiving an internet-routable (public) IP address on its WAN interface.

To check for a public IP address on the WAN Interface

Login to the ZyWALL configuration page. 

1. On the TCP/IP page, locate the router's WAN IP address (see image)
2. Verify that the WAN interface is receiving a public IP address. If the IP address begins in 192.168.X.X, 10.X.X.X or 172.16.X.X-172.31.X.X then the router is not receiving a public IP address and you should contact your ISP to put your modem in bridge, DMZ, or PPOE mode